Welcome to the official website of BORUNTE

BRTYZGT04S2B Two axis robot

BRTYZGT04S2B Two axis robot

¥30000

Short Description

 

 

 

Main Specification

 

Arm Length (mm): 450

 

Repeatability (mm):

 

Loading Ability (kg): 6

 

Power Source (kVA): 1.59

Product Introduction

 

BRTYZGT04S2B type robot is a two-axis robot developed by BORUNTE. It adopts a new drive control integrated control system, with fewer signal lines and simple maintenance. It is equipped with a handy mobile hand-held operating teaching pendant; the parameters and function settings are clear, and the operation is simple and fast. The whole structure is driven by a servo motor and RV reducer, which makes the operation more stable, accurate, and efficient.

 

 

Basic Parameters

 

Applicable to die casting machine 400T-800T
Msnipulator Motor Drive(kW) 1kW
Tableapoon Motor Drive(kW) 0.75kW
Arm reduction ratio RV40E 1:153
Ladle reduction ratio RV20E 1:121
Max.loading(kg) 6
Recommended tableapoon type 4.5kg-6kg
Tableapoon Max(mm) 450
Recommended height for smelter(mm) ≤1100mm
Recommended height for smelter arm ≤500mm
Cycle Time 7.3S (The standby position moves forward and returns to the standby position after completion)
Main control power AC Single phase AC220V/50Hz
Power Source(kVA) 1.12kVA
Dimension length, width and height(1240*680*1540mm)
Weight(kg) 230

 

Trajectory chart

 

 

No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.

 

Precautions for Storage and Handling Caution:

Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.

 

1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.

2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.

3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.

Are you interested in our product?

If you are interested in buying the robots or inquiring about the robot applications, or you want to cooperate with BORUNTE,feel free to contact us. We will provide the best solution for your needs.

ASK FOR A QUICK QUOTE

We will contact you within 1 working day, please pay attention to the mail with the suffix “565816142@qq.com”.