¥10000
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
BRTP08WSS0PC series applies to all types of horizontal injection machines of 150T-250T for take-out products. The up and down arm is a single/double sectional type. The up and down action, drawing part, screwing out, and screwing in of them is driven by air pressure, with high speed and high efficiency. After installing this robot, productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste.
MainSpecification:
|
Power Source(kVA) |
Recommendedl.M.M (ton) | Traverse Driven |
Model of EOAT |
|
1.27 |
150T-250T | Cylinder drive | zero suctions zero fixtures |
| Traverser Stroke (mm) | Crosswise Stroke (mm) | Vertical Stroke (mm) |
Max.loading (kg) |
|
/ |
300 | 850 | 2 |
| Dry Take Out Time (sec) | Dry Cycle Time (sec) | Swing Angle (degree) |
Air Consumption (NI/cycle) |
|
2 |
6 | 30-90 | 3 |
| Weight(kg) | Repeatability(mm) |
|
|
|
60 |
±0.05 |
Model representation: I:Single cut type. W:Telescopic type. S：Product arm. S0：Driven by cylinder(Traverse-axis).
The above-mentioned cycle time are the results of our company’s internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
|
A |
B | C | D | E |
| 1205 | 1031 | 523 | 370 |
972 |
|
F |
G | H | I | J |
| 619 | 102 | 300 | 180 |
45° |
|
K |
||||
|
90° |
