¥45000
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
BRTNN15WSS5P series is suitable for 470T-800T plastic injection molding machine, five-axis AC servo drive, standard AC servo drive shaft, the rotation angle of the A-axis:360° , and the rotation angle of the C-axis:180° , which can locate and adjust the fixture angle freely, it has a long life, high accuracy, low failure rate, simple maintenance, mainly for rapid removal or complex angle removal applications, especially long shaped products such as automotive products, washing machine. Five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high repeat precision, can simultaneously control multiple axes, simple equipment maintenance, and low failure rate.
MainSpecification:
|
Power Source(kVA) |
Recommendedl.M.M (ton) | Traverse Driven | Model of EOAT |
| 3.23 | 470T-800T | AC Servo motor |
two suctions two fixtures |
|
Traverser Stroke (mm) |
Crosswise Stroke (mm) | Vertical Stroke (mm) | Max.loading (kg) |
| 2260 | 900 | 1500 |
15 |
|
Dry Take Out Time (sec) |
Dry Cycle Time (sec) | Air Consumption (NI/cycle) | Weight(kg) |
| 3.73 | 11.23 | 3.2 |
500 |
|
Repeatability(mm) |
|||
|
±0.1 |
Model representation: W:Telescopic type. S:Product arm. S5:Five-axis driven by AC Servo Motor(Traverse-axis、AC-axis、Vertical-axis+Crosswise-axis).
The above-mentioned cycle time are the results of our company’s internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
|
A |
B | C | D | E |
| 1831 | 3270 | 1500 | 500 |
2260 |
|
F |
G | H | I | J |
| / | 190 | / | / |
1254 |
|
K |
L | M | N | |
| / | 373 | 450 | 900 |
|
