¥30000
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
BRTNG11WSS3P/F series apply to all types of horizontal injection machine ranges of 250T-480T for take-out products. The vertical arm is the telescopic type with the product arm. Three-axis AC servo drive saves time than similar models, accurate positioning, and short forming cycle. After installing the manipulator, the productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste. Three-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, can simultaneously control multiple axes simple equipment maintenance, and low failure rate.
MainSpecification:
| Power Source(kVA) | Recommendedl.M.M (ton) | Traverse Driven | Model of EOAT |
| 5.38 | 250T-480T | AC Servo motor |
two suctions two fixtures |
|
Traverser Stroke (mm) |
Crosswise Stroke (mm) | Vertical Stroke (mm) | Max.loading (kg) |
| 1700 | 700 | 1150 |
2 |
|
Dry Take Out Time (sec) |
Dry Cycle Time (sec) | Air Consumption (NI/cycle) | Weight(kg) |
| 0.68 | 4.07 | 3.2 |
330 |
|
Repeatability(mm) |
|||
|
±0.05 |
Model representation: W:Telescopic stage. S:Product arm S3:Three-axis driven by AC Servo Motor(Traverse-axis、Vertical-axis+Crosswise-axis)
The above-mentioned cycle time are the results of our company’s internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
|
A |
B | C | D | E |
| 1482 | 2514.5 | 1150 | 298 |
1700 |
|
F |
G | H | I | J |
| / | 219 | / | / |
1031 |
|
K |
L | M | N | |
| / | 240 | 242 |
700 |
