¥30000
BRTM09IDS5PC/FC series is suitable for the finished product extraction of 160T-320T horizontal injection molding machine, single-cut arm type, two arms, five-axis AC servo drive, can be used for quick removal or in-mold sticking, in-mold inserts and other special product applications.
Recommended I.M.M (ton): 160T-320T
Vertical Stroke (mm): 900
Traverse Stroke (mm): 1500
Max loading (kg): 10
Weight (kg): 310
BRTM09IDS5PC/FC series is suitable for the finished product extraction of 160T-320T horizontal injection molding machine, single-cut arm type, two arms, five-axis AC servo drive, can be used for quick removal or in-mold sticking, in-mold inserts and other special product applications. Accurate positioning, high speed, long life, low failure rate. Installing the manipulator can increase production capacity by 10-30% and will reduce the defective rate of products, ensure operator safety, and reduce manual labor. Accurately control production, reduce waste and ensure delivery. Five-axis driver and controller integrated system: fewer signal lines, long-distance communication, good expansion performance, strong anti-interference ability, high accuracy of repeated positioning, multi-axis can be controlled at the same time, simple equipment maintenance, and low failure rate.
Power Source(kVA) | Recommendedl.M.M (ton) | Traverse Driven | Model of EOAT |
3.1 | 160T-320T | AC Servo motor | two suctions four fixtures |
Traverser Stroke (mm) | Crosswise Stroke (mm) | Vertical Stroke (mm) | Max.loading (kg) |
1500 | P:650-R:650 | 900 | 10 |
Dry Take Out Time (sec) | Dry Cycle Time (sec) | Air Consumption (NI/cycle) | Weight(kg) |
2.74 | 7.60 | 4 | 310 |
Repeatability(mm) | |||
±0.05 |
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
Precautions for Storage and Handling Caution:
Do not store or place the machine in the following environment, otherwise it may cause fire, electric shock or machine damage.
1. Places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature conditions, places where the relative humidity exceeds the storage humidity, or places with large temperature differences or condensation.
2. Places close to corrosive gas or flammable gas, places with a lot of dust, salt and metal dust, places where water, oil and medicine drip, and places where vibration or shock can be transmitted to the subject. Please do not grab the cable for transportation, otherwise it will cause damage or failure of the machine.
3. Do not stack too much products on the machine, otherwise it may case machine damage or failure.
If you are interested in buying the robots or inquiring about the robot applications, or you want to cooperate with BORUNTE,feel free to contact us. We will provide the best solution for your needs.
We will contact you within 1 working day, please pay attention to the mail with the suffix “565816142@qq.com”.